
Troubleshooting
Problem Possible cause Remedy
There is no spark when lighting the
gas
• There is no electrical supply • Make sure that the unit is con-
nected and the electrical supply
is switched on.
• Control the fuse. If the fuse is re-
leased more than one time, refer
to a qualified electrician.
• Burner cap and crown are placed
uneven
• Make sure that the burner cap
and crown are in correct posi-
tions.
The flame is blow out immediately
after ignition
• Thermocouple is not heated suf-
ficient
• After lightning the flame, keep
the knob pushed for equal or less
than 10 seconds.
The gas ring burns unevenly • Burner crown is blocked with
food residues
• Make sure that the injector is not
blocked and the burner crown is
clear of food particles.
8
Comentarios a estos manuales