Neue GH601SS Manual de usuario descargar pdf (Pagina 7)

Care and cleaning

Warning! Refer to the Safety chapters.

Warning! Deactivate the appliance and let it cool

down before you clean it. Disconnect the

appliance from the electrical supply before you do

cleaning or maintenance work.

Scratches or dark stains on the surface have no

effect on how the appliance operates.

• You can remove the pan supports to easily clean the

hob.

• To clean the enamelled parts, cap and crown, wash

them with warm soapy water and dry them carefully

before you put them back.

• Wash stainless steel parts with water, and then dry

them with a soft cloth.

• The pan supports are not dishwasher proof. They

must be washed by hand.

• The enamel coating occasionally can have rough

edges, so be careful when you wash the pan sup-

ports by hand and dry them. If necessary, remove

stubborn stains with a paste cleaner.

• Make sure you position the pan supports correctly af-

ter cleaning.

• To make the burners work correctly, make sure that

the arms of the pan supports are in the centre of the

burner.

• Be very careful when you replace the pan sup-

ports to prevent the hob top from damage.

After cleaning, dry the appliance with a soft cloth.

Removing the dirt:

1. – Remove immediately: melting plastic, plastic

foil, and food containing sugar.

– Stop the appliance and let it cool down be-

fore you clean: limescale rings, water rings, fat

stains, shiny metallic discolorations. Use a spe-

cial cleaner applicable for surface of hob.

2. Clean the appliance with a damp cloth and some

detergent.

3. At the end rub the appliance dry with a clean

cloth.

The stainless steel can become tarnished if it is too

much heated. Refer to this you must not cook with pot-

stones, earthenware pans or cast iron plates.

Cleaning of the spark plug

This feature is obtained through a ceramic ignition can-

dle with a metal electrode. Keep these components well

clean to prevent difficult lighting and check that the

burner crown holes are not obstructed.

Periodic maintenance

Periodically speak your local Service Force Centre to

check the conditions of the gas supply pipe and the

pressure adjuster, if fitted.

Troubleshooting

Problem Possible cause Remedy

There is no spark when lighting the

gas

• There is no electrical supply • Make sure that the unit is con-

nected and the electrical supply

is switched on.

• Control the fuse. If the fuse is re-

leased more than one time, refer

to a qualified electrician.

• Burner cap and crown are placed

uneven

• Make sure that the burner cap

and crown are in correct posi-

tions.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Comentarios a estos manuales

Sin comentarios

Neue GH601SS Manual de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Placas Neue GH601SS